|2A Motor Shield For Arduino||
Arduino product family is a great learning platform for electronics, programming and robotics. But most projects at some point require mobility. This board allows for motor control with Arduino right away. Stack up this shield on your controller and drive motors with higher power requirements. Depending on the motor of choice, you can make it fast or handle a higher payload. This Arduino Compatible Motor Shield (2A) uses L298P chip which allow to drive two 7-12V DC motors with maximum 2A current. This shield can be directly mounted onto standard Arduino Duemilanove and Arduino Mega.
Speed control is achieved through conventional PWM which can be obtained from Arduino’s PWM output Pin 5 and 6. The enable/disable function of the motor control is signalled by Arduino Digital Pin 4 and 7. The Motor shield can be powered directly from Arduino or from external power source. It is strongly encouraged to use external power supply to power the motor shield.
|2wd miniQ Robot chassis||
2WD miniQ robotic platform is especially designed for students and hobbyists. It's versatile and small, suitable for most indoors applications. It features high quality and powerful metal gear motors which make it a speedy robot. It is ideal for maze competition and educational courses, and is very easy to assemble, check out our assembly video below. Only requires 8 screws to get the job done and you can use our sample codes on our Wiki pages.
If you are planning to get started building a robot, as a proof of concept, its small body and light weight makes it a great choice. This robot can easily be used and tested on a desk or small area, easily assembled and expanded. An extra set of stand off and screws might come handy. It's round shape helps when moving around objects, avoiding obstruction. The platform has convenient drillings that helps placing sensors or other screwable parts like custom designed casing.
To drive this robot, you may need the Romeo, the Romeo BLE, or standard arduino with motor shield.
|4xAA battery holder (square)||
Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration.
|6xAA Battery Holder(double layer)||
This battery holder can hold 6 AA battery which can make 7.2 V rechargeable battery pack from NiMH / NiCd cells or 9V battery pack from alkaline cells.
It comes with a 6" Red & Black Wires with side by side & stack connection.
|A short U-bracket||
This is a high quality aluminum servo bracket (short), available in black anodized. Works great with our Multi-Purpose Servo Bracket.
|Aluminum Multi-Purpose Servo Bracket||
High quality black anodized aluminum multi-purpose standard servo bracket. It is suitable to make Pan/Tilt and multi-axis joints for use in robot arms and legs.
|Baron-4WD Mobile Platform||
The DFRobot 4WD Arduino-Compatible Platform w/Encoders is widely used on the world's self-developed control panel platform. This drive method has a strong obstacle and climbing ability with high strength aluminum alloy body. It features thick acrylic material to eliminate the heavy, fragile thin acrylic material defects. The powerful motor performance, flexible and rapid movement is especially suitable for outdoor grass, gravel, sand, or slope pavement.It is very useful for robot competitions and other research projects. It's car mounting holes is compatible with a variety of sensors. There is enough space within the car to install the battery. It is made with the consideration to facilitate the future expansion of PTZ cameras or more degrees of freedom manipulator. This platform comes with two sets of encoder can be precise control of the car trip, and the closed-loop PID control.
|LG-NS robot gripper||
How can your robot rule the world with an iron fist if it doesn't have a hand? This LG-NS robot gripper makes a great addition to a small arm or mobile base. The gripper features injection molded components and can use two standard hobby servos (not included) for open and close and wrist rotate. The clamp open to 1.3" and the wrist rotates approximately 180 degrees. It needs only a screw driver for assembly.
|Metal ball casters||
Metal ball caster, 1mm thick steel plate from the machine stamping, it has the capbility to support 15KG payload. The Caster is strong and lightweight. It has 20mm high round body, with a total weight of only 37g; and large steel ball around a small ball around as much as 40 to rotate the main scroll ball much more smoothly, which make the robot walk or move at a more flexible and comfortable way. Our popular 2WD Arduino Platform adapts this caster.
|Relay Shield for Arduino V2.1||
One of the most interesting projects for your boards is perhaps being able to control High power devices like Lamps, water pumps, garage doors and so on. But interfacing with high power and AC is quite a dangerous task when building the circuitry. Relays allow for interfacing an external electrical circuit like a switch. With relays you can now connect external circuit or devices directly to your Arduino.
DFRobot Relay Shield V2.1 is a completely new design which is capable of controlling 4 relays at a time. The max switching power DC 90W or AC 360VA gives direct control by Arduino/DFRduino controllers through digital I/Os with external 9V supply. With built-in Xbee socket, it can be wireless remote controlled via Xbee/bluetooth/WPM.
This relay shield is an ideal solution for home automation and robotics purposes.
NOTE:It requires an external power supply to drive the xbee module and relays.
|Wheel Encoders for DFRobot 3PA and 4WD Rovers||
This encoders are designed for DFRobot 3PA and AWD Rovers. It can give you the rotation degree of the wheels. Encoder uses non-contact method to convert the angular displacement signals. Best fit with Micro DC Geared Motor.It includes encoders, plastic tube, paper-mediated gasket etc.